Before You Start: What Comes with the 513S
The DREO Smart Ceiling Fan 513S is a fan with integrated LED lighting, stepless dimming, and color tone control. It includes a remote control and supports smart home integration. Before beginning installation, confirm you have all components: fan motor assembly, blades, light kit (if applicable), remote, mounting hardware, and the instruction manual. The fan is available in White or Black finishes, so choose the color that best matches your room.
This guide covers general installation steps and setup advice based on the supplied product information. Always refer to the manufacturer's full instructions for your specific model and local electrical codes.
Installation Steps for the DREO 513S
Follow these general steps to install your ceiling fan. For detailed wiring and mounting, consult the included manual.
- Turn Off Power: At the circuit breaker, shut off power to the existing light fixture or ceiling box where you will install the fan. Use a voltage tester to confirm power is off.
- Assemble the Fan Motor and Blades: Attach the fan blades to the motor housing using the provided screws. Ensure blades are evenly spaced and tightened securely.
- Mount the Fan Bracket: Secure the mounting bracket to the ceiling electrical box, making sure it is rated to support a ceiling fan. Use the hardware included with the fan.
- Hang the Fan Motor: Lift the motor assembly onto the mounting bracket. Connect the wiring: match the house wires (black/red/white/ground) to the fan wires, typically using wire nuts. Secure all connections.
- Attach the Light Kit (if applicable): If your model includes a light kit, connect the light wiring and attach the light fixture to the fan. Secure with screws.
- Install the Blades and Light Shades: After the motor is mounted, install any remaining blade pieces or light shades as directed.
- Restore Power and Test: Turn power back on at the breaker. Test the fan using the remote or wall switch. Check for wobble or noise.
Key Features of the DREO Smart Ceiling Fan 513S
- Smart Ceiling Fan 513S: Blade span suitable for bedrooms, living rooms, and dining rooms. The size is ideal for medium-sized rooms (up to about 12x12 feet).

Smart Ceiling Fan 513S - Smart Ceiling Fan 513S: Stepless dimmable lighting and color tone control. You can adjust brightness and color temperature to match your mood or activity.
- Smart Ceiling Fan 513S: One-touch reversible ceiling fan for year-round use. Reverse the fan direction to circulate warm air in winter or cool air in summer.
- Smart Ceiling Fan 513S: Comes with remote control for convenient operation. No need to get up to adjust fan speed or light settings.
Pairing the Remote Control
The remote control for the DREO 513S typically needs to be paired with the fan receiver. After installation is complete and power is restored, locate the pairing button on the fan's receiver (usually inside the canopy). Press and hold the pairing button until the light blinks, then press the remote's power button. The fan should respond. If pairing fails, turn off power and try again. Refer to the manual for exact pairing steps.
Smart Home Integration Tips
The 513S is designed for smart home control. After installation, you can connect the fan to your home Wi-Fi network using the DREO app (available for iOS and Android). Follow the app's instructions to add the fan, which typically involves scanning a QR code or entering the fan's ID. Once connected, you can control fan speed, light brightness, color temperature, and set schedules from your phone or voice assistant (e.g., Alexa or Google Assistant).
For voice control, enable the DREO skill in your voice assistant app and link your account. Then you can say commands like "Alexa, set the ceiling fan light" or "Hey Google, turn on the ceiling fan."
Troubleshooting Common Issues
If the fan does not turn on after installation, check that power is restored at the breaker and that the wall switch is on. Verify wire connections are secure. For remote issues, replace batteries and re-pair the remote. If the fan wobbles, ensure blades are attached correctly and that the ceiling bracket is secure. Slight wobble can sometimes be corrected by tightening blade screws or using a balancing kit (not included).
For persistent problems, consult the DREO support website or contact customer service. Do not attempt to open the motor housing.

