Back to Blog
How-to Guides 2026-11-21 DREO Home Ecosystem | Air Comfort, Smart Kitchen 0 views

RO Water Filter 112-115 Replacement: Step-by-Step Guide

RO Water Filter 112-115 Replacement: Step-by-Step Guide

Learn how to replace your DREO RO Water Filter 112, 113, 114, or 115 with this clear step-by-step guide. Keep your water clean and refreshing.

What You Need to Know Before Starting

Replacing your DREO RO Water Filter (models 112, 113, 114, or 115) is a straightforward task that helps maintain clean, great-tasting water. The DREO RO Composite Filter (PCRC) uses a 7-stage filtration system with a reverse osmosis membrane to reduce impurities and improve taste. This guide covers the general replacement process for all four models.

Before you begin, make sure you have the correct replacement filter for your pitcher or dispenser. The DREO RO Water Filter 112 & 113 & 114 & 115 Replacement Filter (sold as a single unit) is designed for these models. Turn off the water supply to your system if applicable, and have a clean towel or cloth ready.

Step-by-Step Replacement Process

Follow these steps to replace your DREO RO water filter. The process is similar for models 112, 113, 114, and 115.

  1. 1. Remove the Old Filter: Unplug the unit or disconnect from power if your model has an electric pump. Remove the old filter by twisting it counterclockwise (usually a quarter turn) and pulling it straight out. Dispose of the old filter according to local regulations.
  2. 2. Prepare the New Filter: Take the new DREO RO Composite Filter (PCRC) out of its packaging. Remove any protective caps or seals. Some models may recommend rinsing the filter under cold water to remove any loose carbon dust – check your model's instructions.
  3. 3. Install the New Filter: Align the new filter with the slot in the pitcher or dispenser. Push it in firmly and twist clockwise until it locks into place. You should feel a slight click or resistance. Make sure it is seated securely.
  4. 4. Flush the System: Fill the reservoir with cold tap water and run a full cycle, discarding the first batch of filtered water. This flushes out any air and loose particles from the new filter. Repeat if your model recommends a second flush.
  5. 5. Resume Normal Use: After flushing, fill the reservoir again. Your DREO RO filter is now ready to use. The 7-stage filtration system will begin reducing impurities and improving taste immediately.

Tips for a Smooth Replacement

Always use cold water when flushing and operating the filter – hot water can damage the reverse osmosis membrane. If you notice a slow flow after installation, it may take a few days for the filter to fully saturate and reach its optimal performance. Keep track of replacement intervals; a typical RO filter lasts a certain duration depending on usage and water quality – follow the product instructions for specific replacement timing.

What the DREO RO Composite Filter Offers

  • RO Water Filter 112 & 113 & 114 & 115 Replacement Filter: Built with a 7-stage filtration system and reverse osmosis membrane, it helps reduce impurities, improve taste, and support consistent filtration performance for everyday water use. This explains why replacing your filter on schedule is important: the multi-stage system is designed to keep your water clean and refreshing.
    RO Water Filter 112 & 113 & 114 & 115 Replacement Filter
    RO Water Filter 112 & 113 & 114 & 115 Replacement Filter

Related Articles

Customer Service
Home
Products
Cart
Profile