Aroma Pads for DREO Macro AP314: Setup, Swap & Scent Tips

Quick answer

Place a new aroma pad in the AP314 aroma tray, add 3–5 drops of essential oil, and replace every 1–2 weeks for optimal freshness.

Setup and swap steps

1. 1. Open the aroma tray: Locate the aroma tray on your DREO Macro AP314. Slide it open or lift the cover, depending on your model variant. If the tray feels stuck, check that the fan is off and unplugged before applying gentle pressure.
2. 2. Insert a new aroma pad: Place one natural fiber cotton pad into the tray. Make sure it lies flat and does not block any vents. Do not reuse old pads—they lose absorbency and may carry residual odors.
3. 3. Add essential oil: Apply 3–5 drops of your favorite essential oil directly onto the pad. Avoid over-saturating; excess oil can drip into the fan mechanism. Start with fewer drops and add more later if you want a stronger scent.
4. 4. Close the tray and run the fan: Secure the tray cover and turn on the fan. The fragrance will circulate as air passes over the pad. For the best scent throw, use a medium fan speed—too low and the scent may not disperse; too high and it may dissipate quickly.
5. 5. Replace every 1–2 weeks: Swap the pad when the scent fades or after two weeks, whichever comes first. Discard the used pad and repeat from step 2. If you change essential oils frequently, replace the pad each time to avoid mixing scents.

Product facts

• Aroma Pads for DREO Macro AP314: Made from natural fiber cotton for safe, effective scent diffusion. The natural cotton absorbs oil evenly and releases fragrance gradually, so you get consistent scent without chemical additives.